Features:
1) Applicable materials:PP,BOPS,PS,HIPS,PET,PVC,PE.Three kinds of product forming modes : female die,male die,female-male die. The material of cutting knife is hardware module.
2) Fit to operate with vacuum forming machine,which the feeding part is controlled by servo drive system.So it can be the whole production line,feeding,heating,forming,cutting,stacking,counting and collecting into one process.
3) Design features:High-rigidity, high-precision, high-reliability, high-efficiency, pursue the details etc. Operating and controlling layout is efficient, convenient, distinct and safest. Technically, less demanding on operator, improve productivity efficiency, reduce secondary pollution.
4) The drive of machine is composed of a main 7.5KW vector frequency conversion driving system,5 sets 0.85KW servo motor systems,7 sets high-precision ball screws and a set of gear speed reducer with coder. After inputing the product parameters of height,length,stacking layers,the machine will be adjusted to the optimal origin position.And as the origin position for reference point to make the products lifting,draging,pulling,cutting,stripping,stacking,counting and collecting.Reduce the trouble of adjusting the machine structural.
5) The main motor adopts the Panasonic vector inverter drive system for 7.5KW. The main spiral bevel gears with high transmission efficiency. After Heat Treatment, the driving gear of reducer will been grinding process to enhance the intensity of use, accuracy and efficiency of transmission.
6) The mould change is simple and convenient,and the step is from the computer.With a dedicated mould change cart.
7) Good security.Each movement parts of machine has protected by cover.Has grating protect system within the work area,as long as the parts of body was sensed,the machine stops immediately.Safety brake to protect the main drive system,even in the case of power outage.
Technical parameters:
Max cutting size 1050×320mm
Max cutting height150mm
Sheet thickness0.2-2mm
Air pressure0.7Mpa
Main power rating7.5KW
Feeding sheet power rating0.85KW Servo drive system
The front and rear lifting power ratingEach 0.85KW (Two sets servo drive system)
Stacking power rating0.85KW Servo drive system
Disjoinning power rating0.85KW Servo drive system
Max capacity40-50 cycles/min
Power Three phases 380V 50/60HZ
Max blanking force 7 T
Dimensions4550×2015×2736
Weight4 T
| Parameter of HY-800/320cutting machine: |
| 1 |
Max. Cutting area |
800× 320mm |
| 2 |
Max cutting stroke |
150mm |
| 3 |
Thickness range of sheet |
0.2-1.5 mm |
| 4 |
Air pressure |
0.7Mpa |
| 5 |
Cutting speed |
26-36 cycles/min. |
| 6 |
Air consumption |
0.3 Liters/min |
| 7 |
Max. Cutting capacity |
15 TON |
| 8 |
Feeding sheet power rating |
0.85KW Servo drive system |
| 9 |
Stacking power rating |
0.45KW servo drive system |
| 10 |
Main power |
7.5kw |
| 11 |
Voltage |
AC380V, 50HZ/60HZ |
| 12 |
Weight |
4000kg |
| 13 |
Dimensions
(L × W× H)mm |
4550× 1620× 2500mm |
Audited Supplier 
){kind=link}