Double Heaters Plastic Vacuum Forming Machine
This machine is suitable for forming HIPS, PS, PVC, PET, PP
plastic sheet into various of containers, boxes, dishes, trays, bowls and lids
1. Whole machine adopts PLC to control the production technical process, tail remember of modern computer
2. It adopts cylinder verticality pulling-sheet design. High speed to pull sheet to shorten the time to pull. As a result it saves eletricity to assure the quality of moulding.
3. Heater adopts infrared ceramic heating bricks. Each heating brick has itself solid regulator to control temperature, saving more than 50% electricity compared with the traditional machine.
4. Electric stove adopts enclosed heating device to uniform heat and it can reduce the heat cousumption. It is also installed with manual switches to control the verticality lifting of the electric stove which can benefit the control and assurance of during the production process.
5. The machine is equipped with wind cool, water cool chasis and high speed cold water spraying device to speed up moulding in order to assure the quality of mouldings.
6. Two-row chain with tine translate the sheet that assurance of high speed operation and stability and correctness.
7. Specially equipped with second vacuum, second mould-up, mould-down and the electric-driver adjustment function. So it can make the products with extreme difficulties in processing mould easily and increase the quality of products.
Forming length: 660-1200mm/26-47in (can change)
Sheet width: 610-760mm/24-28in (can change)
Forming height: 165mm(heightest)
Production speed: 200-600times/hour(depond on the shape of product and thickness of sheet)
Mould-up timesone or two times(free to install)
Eject-dieShake to eject-die
Electric furnace rating power30 KW (Max)
Tempering device60 independent electronicses adjust press(one control one)
Motor powerWhole machine 2.25 KW
Vacuum pump power3.0 KW
Cooling-water machine power3.37 KW
PowerThree phases 380V 50HZ/60HZ
Air compressor15KW/20HP (Prepared by customer)
Over packing size:3700 x 1660 x 2300mm,2600 x 1320 x 1450mm
|vacuum thermoforming machine || |
|1.Forming area||710*1200mm(can change)|
|2.Sheet width ||610-760mm (can change)|
|3.Forming height ||0-165mm|
|4.Thickness of sheet||0.15-1.0mm|
|5.Production speed||200-600times/hour(depend on the shape of product and thickness of sheet)|
|7.Electric oven power||30 KW|
|8.Heating device||60 independent electronics non pole adjust(one control one)|
|9.Traction motor power||2.2KW|
|10.Vacuum pump power||3.0 KW|
|11.Cooling-water machine power||3.37 KW|
|12.Power||380V 50/60HZ three phases|
|13.Air compressor||15KW/20HP (remarked by customer)|